Fishing Lure Storage That End Tackle Chaos

Last Updated: November 7, 2026

Quick Summary

You buy a tackle storage system to hang baits visible and within reach instead of digging through a bag or tackle box. Easy View Tackle’s patent-design foam-filled crankbait hangers and clip strips mount inside compartments and under lids with adhesive or screw mount hardware, so baits hang separated, dry, and easy to retrieve.

  • The best mounting points are the inside faces of storage compartments and the underside of compartment lids.
  • Foam-filled crankbait hangers protect treble hook points and barbs holding hard baits in rough water situations.
  • Clip strips hold soft plastics, spinnerbaits, buzzbaits, and other hanging baits.

Table of Contents

Why Lure Storage Hangers Beat Digging Through a Tackle Box

When you buy fishing lure storage hangers, you are not buying another container. You are buying a faster path to the bait you need. Easy View Tackle built its patent-design system around that single idea: every lure hangs visible and within reach, so you can retrieve the bait you need faster. Digging through a tackle boxes or bags cost you time on the water.

The problem with a traditional box is simple. Baits stack on top of each other, hooks snag on neighbors, and the lure you want is always at the bottom. You end up lifting trays, unhooking a crankbait from another bait, and re-sorting the pile before you can tie it on. None of that puts fish in the boat.

Hanging storage; Lures hang vertically on a crankbait hanger and clip strip, separated from each other, with the hook point held in foam or the bait body gripped by a clip. You see the whole collection at a glance and quickly retrieve exactly what you want. That is the core of boat tackle organization: visibility plus separation, using dead space in your boat not more compartments.

Boat Tackle Organization: Mounting Points That Work on a Bass Boat

The best mounting points on a bass boat are the inside faces of storage compartments and the underside of compartment lids. These locations stay off of the casting deck, keep baits secured, and easy to retrieve when a lid opens.

Adhesive vs. Screw Mount Hardware

Easy View Tackle includes all hardware for either adhesive or screw mount application, so you can choose the method that suits your boat. For step-by-step guidance, our easy to follow mounting instrutions will giude you through the mount that you deside to use.

Crankbait Storage Hanger: Foam-Filled Protection for Treble Hooks

The foam-filled crankbait hanger is designed to hold crankbaits and protect the body of the bait along with hook points.

Crankbaits are the fragile part of any crankbait collection. When crankbaits are loose in a box, the body of the bait can become damaged and hooks become rusty if exposed to condensation. A foam-filled crankbait hanger helps keep each bait separate and hooks air drying.

Article image

I M G 0205

Soft Plastic Bait Storage on Clip Strips

Soft plastic bait storage works best when each bag of baits hang from a clip strip instead of removing them from the bag into a tackle box losing their salt and scent. Clip strips hold each soft plastic so it hangs separately.

Clip strips also handle the wider range of tackle. The same strips that hold soft plastics can hold spinnerbaits, buzzbaits, and other hanging baits. That flexibility is what lets one system cover a full boat instead of a single lure type.

Planning Capacity and Storage Footprint

Capacity planning is where most anglers get it wrong: they buy storage for the collection they wish they had, not the baits they actually throw. The fix is to plan around real fishing patterns, then let the vertical layout of the Easy View Tackle system absorb the rest.

Start with a three-pass bait audit. First, pull every bait you fished in the last season and sort by type: crankbaits, soft plastics, spinnerbaits, buzzbaits, and other hanging baits. Second, set aside the baits you reach for on every trip, your confidence baits. Third, note the baits you carry ‘just in case.’

Next, map the space you actually have. On a bass boat, the usable real estate is the inside face of each storage compartment and the underside of each compartment lid. Measure those flat surfaces with a tape measure and write down the height and width of each one. A hanging layout uses that vertical wall and lid space instead of the compartment floor, so the storage footprint stays small even as the lure count grows. The floor stays clear for bulkier gear like rain suits, nets, and tool bags.

Then decide how to split hangers and clip strips. Foam-filled crankbait hangers are built for treble-hook baits, crankbaits and similar hard baits, where the foam grips the hook points and holds the bait straight. Clip strips are the flexible option for soft plastics, spinnerbaits, buzzbaits, and other hanging baits that hang by the bag, body, or wire. A practical split is to give your hard-bait confidence lures the hangers and give soft plastics and wire baits the clip strips, then adjust after a few trips.

Plan for growth, but not too much. You can start with a partial layout in one compartment and expand as your needs become clear. That staged approach keeps you from overbuilding a layout you will want to change.

Match the hardware to the bait type before you commit to a layout.

Rust Resistance, Durability, and Long-Term Care

Hanging storage lets wet baits dry in open air rather than sitting closed in a box.

Here is a practical care routine that keeps the system working season after season:

  • After every wet trip, open the compartment and let baits hang dry before you close the lid. Airflow is the whole mechanism, a hanger that dries a lure is doing its job.
  • Re-check adhesive and screw mounts at the start of each season.

Easy View Tackle’s clip strips are designed to hold soft plastics, spinnerbaits, buzzbaits, and other hanging baits, and its foam-filled crainkbait hangers are designed to hold crankbaits.

Frequently Asked Questions

What are fishing lure storage hangers used for?

Easy View Tackle System holds baits so they hang dry and stay visible. The system uses foam-filled crankbait hangers and clip strips that mount inside boat storage compartments and under lids using adhesive or screw mount hardware. Baits hang separately, so you can see and retrieve the bait of choice without digging through a bag or box.

Can fishing lure hangers be mounted under a storage lid?

Yes. Easy View Tackle crankbait hangers and clip strips are designed to mount inside boat storage compartments and under lids. Using the dead space in your boat to become more efficient. The system includes hardware for adhesive or screw mount application.

What is the difference between crankbait hangers and clip strips?

Crankbait hangers are foam-filled and hold hard baits by the hook. Clip strips hold soft plastics, spinnerbaits, buzzbaits, and other hanging baits that clip on with a special designed clip strip. Complete tackle management system uses both crankbait hangers and clip strips to manage their tackle.

Leave a Reply

Your email address will not be published. Required fields are marked *