Fishing Tackle & Spinner Bait Storage Installation Guide
This fishing tackle & spinner bait storage system is designed for efficiency and to eliminate downtime on the water. Our step-by-step instructions will help you to keep your fishing tackle in order. It’s as easy as 1,2,3!
Read on for information on Installing the bags, spinner baits, jigs and pre-rigged tackle.
Installing the Bags
For Efficiency – Open the bag and line up the hanging hole of the back flap of the bag with the clip jaw. Press the clip jaw to open. Now slide the back flap hanging hole of the bag through the clip jaw and over the zipper of the bag. (As shown in photo 1)
Note: This will secure the bag and it would have to tear the zipper out of the bag for it to fall off.
To retrieve a bait, simply pull the front flap of the bag (as shown in photo 2), grab a bait out of the bag (as shown in photo 3), then close the boat lid.
Note: It is not necessary to close the bag. You can zip them back closed when the day is over. For storage, use the same procedure as noted above but keep your bags closed.
Installing the Spinner Baits
For efficiency – The special design clip jaw allows you to hang your spinner baits one per clip so you can have quick and easy access (as shown in photo 3). This will make selection easy by profiling your baits so you can see the head size, skirt color, type and size of the blades (as shown in photo 1). Retrieving the bait of your choice is as easy as pressing the clip button to release it (as shown in photo 2).
Note: If you have been fishing with another spinner bait simply clip the wet bait back onto the system and now that one is air drying.
You can hang two spinner baits per clip for storage.
Installing the Jigs
For efficiency – Clip the weed guard of the jig into the jaws of the clip and then you can profile your jigs (as shown in photo 2).
Note: This is only one of many ways you can hang your jigs. When you see a jig you want to fish, just press the clip button and tie it on (as shown in photo 1).
For efficiency – You can purchase some small 3×3 bags at your local hobby store. Pre-tie your Carolina rigs, drop shot rigs, grass rigs, etc. (as shown in photo 1).
Note: This will cut down on your loss time tying these rigs out there on the water during fishing time.
Works great on manufacturer’s bags of hooks and weights too (as shown in photo 3). Simply open the bag and get the hook or weight you need (as shown in photo 2).
Note: No need to detach the bag from the Easy View Tackle System (as shown in photo 2).